[1]李玖详,刘仁鑫. 旋耕刀研究现状与展望[J]. 现代农业科技,2015(6):182-183.
[2]孔祥莹,袁文旭,孔令德. 旋耕机研究综述[J]. 山西机械,2000(3):46-48.
[3]张胜兰,郑东黎,郝琪,等. 基于HyperWorks的结构优化设计技术[M]. 北京:机械工业出版社,2007.
[4]Altair Engineering Inc. Hyper works users guide[Z]. 2012.
[5]吴中博,李书. 基于Optistruct的结构静动力拓扑优化设计[J]. 航空计算技术,2006,36(6):9-12.
[6]Eschenauer H A,Olhoff N. Topology optimization of continuum structures:a review[J]. Appl Mech Rev,2001,54(4):331-390.
[7]王建超,张建瓴,张帆,等. ANSYS在旋耕起垄机刀片设计中的应用[J]. 农机化研究,2012(1):215-217,221.
[8]王荣,王宏宇,金镜,等. 基于ANSYS的大耕深旋耕刀结构优化设计[J]. 农机化研究,2015(5):136-139.
[9]董向辉. 旋耕机刀片运行轨迹及进刀量计算[J]. 农业科技与装备,2014(10):18-19.
[10]葛云. 微型旋耕机主要工作部件的应力仿真与可靠性设计[D]. 石河子:石河子大学,2005.
[11]王建定,桑正中,陈翠英,等. 旋耕机所需功率推算[J]. 农业机械化学报,1987(3):44-50.
[12]管西强,方在华. 旋耕机耕耘转矩的仿真分析[J]. 洛阳工学院学报,1999,20(1):3-6.
[1]田永财,王宏立.旋耕刀表面激光熔覆铁基涂层的组织性状及耐磨性[J].江苏农业科学,2016,44(11):359.
Tian Yongcai,et al.Microstructure and abrasion resistance of Fe-based coating by laser cladding on rotary blade steel[J].Jiangsu Agricultural Sciences,2016,44(12):359.
[2]邹德健,裴承慧,刘志刚,等.基于有限元的往复式刀具柠条平茬仿真及优化[J].江苏农业科学,2017,45(04):172.
Zou Dejian,et al.Simulation and optimization of reciprocating cutter based on finite element[J].Jiangsu Agricultural Sciences,2017,45(12):172.
[3]张大斌,刘祖国,余朝静,等.山地移动式地膜回收机机架拓扑优化[J].江苏农业科学,2018,46(16):194.
Zhang Dabin,et al.Topology optimization of mountain mobile film recovery machine[J].Jiangsu Agricultural Sciences,2018,46(12):194.
[4]胡奔,廖敏,李晓鹏,等.拖拉机前动力输出变速箱壳体轻量化设计[J].江苏农业科学,2019,47(10):239.
Hu Ben,et al.Lightweight design of front power output gearbox housing for tractor[J].Jiangsu Agricultural Sciences,2019,47(12):239.
[5]雷哓晖,吕晓兰,李雪,等.喷杆喷雾机拨禾板固定支架优化设计[J].江苏农业科学,2019,47(14):243.
Lei Xiaohui,et al.Optimized design of boom sprayer pushing plate fixed bracket[J].Jiangsu Agricultural Sciences,2019,47(12):243.